Ready to be amazed? Behold milwaukee rebar tie gun price
The best milwaukee rebar tie gun price
Proshine Rebar Tie Gun 0.3-1.3in/8-34mm Automatic Rebar Tying Tool W/Case Rechargeable 4400mAh Battery
$249.99
in stock
Amazon.com
as of July 27, 2024 3:24 pm
Features
- ▷[IMPORTANT PARAMETERS]: Knot number per charge: 3000 times |Strapping range: 8-34mm | Single strapping time: 0.8 seconds | Battery capacity: 4400 mAh | Wire length: 300-500mm | Charging time: 1.5h | Tying Wire Length: 110m | Weight : 3lbs/1.36 kg | Voltage: 12.8V.
- ▷[EFFICIENT OPERATION & STRONG BATTEY LIFE]: Fully automatic strapping, one battery can last about 4 hours. Using lithium battery technology, the rebar tying machine can be fully charged in 1.5 hours and can be used continuously for 8 hours.
- ▷[ONLY TAKES 0.8S FOR EACH KNOT]: The automatic rebar tie gun is equipped with new Hall elements, which can be intelligently set to automatically complete the strapping process. The binding efficiency is increased by 2-4 times compared with the old version, and it takes ONLY 0.8 seconds to tie a wire knot.
- ▷[4 LEVELS ADJUSTABLE & GALVANIZED IRON WIRE]: The strength of the rebar tie gun is adjustable, a total of 4 gears are set, and the 4th gear is the largest. To adjust the gear just press the + or - button. For example, three beeps are three gears. The surface of galvanized steel wire is smooth and clean, without cracks, it is not easy to rust, has strong adhesion, durable corrosion resistance, excellent toughness and elasticity.
- ▷[WIDE RANGE OF APPLICATIONS]---This rebar tier can be used for buildings, bridge engineering, highway tunnels, mine construction, floor pipe, heating floor mesh, steel bar, etc. It greatly reduces the tying time of workers, improves their work efficiency, and it's an excellent tool for building decoration.
NEWTRY Automatic Rebar Tie Gun Pro 7-34mm Rebar Tier Tying Machine 0.3’’-1.33’’ Steel Bar Tie Tool with 2 Rechargeable Batteries 4000mAh 21V
$325.90
in stock
Amazon.com
as of July 27, 2024 3:24 pm
Features
- BASIC PARAMETERS---Input voltage: AC100-240V; Output voltage: 21V; Tying diameter range:0.3’’-1.33’’/7-34mm; Battery: 2000mAhX2; Times a knot: 0.8S, 38-42 knots in 1 minute; Time to fully charged: 1.5h; Wire length: 360ft per coil; Machine weight: 3.2lb.
- EFFICIENT&FAST---The rebar tie gun boasts an impressive speed of 38-42 knots per minute, with each knot taking a mere 0.8 seconds to complete. Using this tool, one machine can easily replace the work of 3-4 laborers, saving time and energy while increasing overall productivity. Upon installing the coil for the first time, it is recommended to test the knot several times to ensure proper function. If the wire is not coming out, it may indicate that the coil was not installed properly.
- POWERFUL 2000mAh BATTERY---With a 2000mAh large capacity battery that can be fully charged in just 2 hours, this rebar tie gun allows for extended periods of use without the need for constant recharging. Each battery can handle up to 3000 knots before needing to be swapped out, and the machine is equipped with two batteries to ensure uninterrupted operation. While one battery is charging, simply switch to the other battery to continue using the machine.
- 1-9 GEAR ADJUSTABLE---This rebar tying tool offers an impressive 9-gear adjustable strapping system, providing maximum flexibility and control over tying power. Each gear offers increasing levels of tying power, ranging from grade 1 to 9, to handle a wide variety of tying applications. Choose the appropriate gear based on the specific requirements of each job to ensure optimal results. Additionally, the machine is equipped with an adjustable loop control that allows you to adjust the number of knotted loops to meet the unique demands of each task.
- UPGRADED APPEARANCE DESIGN---The tier machine features a transparent head shell, which allows you to conveniently check whether the iron wire passes through the gears and whether all internal parts are functioning correctly. This feature not only provides visibility to ensure proper operation but also gives the machine a sleek and modern design.
NEWTRY Upgraded Rebar Tie Gun Automatic Rebar Tier Machine Tying Gun 1’’-1.57’’ Steel Bar Tie Tool with 2 Rechargeable Batteries 328ft Wire Coil 0.8S a Knot 14.4V
$1,159.00
in stock
Amazon.com
as of July 27, 2024 3:24 pm
Features
- BASIC PARAMETERS---This knot tying machine features a powerful input voltage of AC100-240V, with an output voltage of 14.4V and a tying diameter range of 1’’-1.57’’/26-40mm. Equipped with two high-capacity 2000mAh batteries, this machine offers 0.8s knot-tying speed, with an impressive 38-42 knots tied per minute. It requires a mere 2.8 hours to fully recharge and boasts an ample wire length of 328ft (one coil). With a lightweight design and a weight of just 3.2lbs, this machine is easy to handle and maneuver, making it ideal for use in a variety of settings.
- 99.2% SUCCESS RATE---Offering exceptional reliability and performance, the NEWTRY upgraded rebar tier has passed a rigorous 1,000,000 times life test with flying colors. With a tying success rate of up to 99.2%, this innovative tool ensures consistent and accurate results every time. One of its most impressive features is the automatic knot-detaching mechanism, which ensures that the knot is easily and cleanly detached after each tying process – with no dragging or tangling of the wire.
- EFFICIENT&FAST---With its powerful motor and advanced technology, this rebar tie gun can effortlessly tie 38-42 knots per minute, with each knot taking just 0.8 seconds to complete. Compared to traditional tying methods that require manual labor, this innovative tool offers good speed and efficiency, significantly reducing work time and effort. In fact, one rebar tie gun alone has the potential to replace 3-4 workers, making it a cost-effective investment for anyone looking to increase productivity and streamline their operations.
- POWERFUL 2000mAh BATTERY---Featuring a powerful 2000mAh battery capacity, this rebar tie gun boasts an impressive performance, capable of tying up to 2000 knots on a single charge. With a fast charging time of 2.8 hours, you'll be able to keep it running all day with minimal downtime. The gun comes with 2 batteries which provide a total of 4 hours of continuous use, perfect for long workdays or large projects. The dual charging station allows you to easily charge both batteries at once, ensuring that you always have a backup power source when you need it. Additionally, even after 3 years of heavy use, the batteries retain 80% of their original battery life.
- 1-5 GEAR ADJUSTABLE--The dial design makes it easy to set the machine to the desired gear - simply turn the dial and adjust the strapping strength as needed. With five grades available, the tying power increases gradually from grade 1 to 5, giving you greater control and flexibility in your work. Choosing the correct gear according to the actual situation ensures that you achieve the optimal strapping strength for your specific application, maximizing the effectiveness of your work and ensuring that your materials are securely fastened.
Want more information? No ProblemIntrigued by what this looks like?
This Rebar Tying Tool is Super Fast-Is it Worth the Cost?
Look how fast I can tie rebar. The foundation guys were putting rebar in for the spray booth pit walls, and they were using this tying ...
Using a rebar tie gun when placing rebar is a game changer!!
Makita 18V LXT Rebar Tying Tool (XRT01) Testimonial
Makita has delivered a cordless tying solution for rebar and steel rod with the 18V LXT Brushless Rebar Tying Tool (XRT01).
Price Drops Alerts
Proshine Rebar Tie Gun 0.3-1.3in/8-34mm Automatic Rebar Tying Tool W/Case Rechargeable 4400mAh Battery, Proshine
Price: $249.99
as of July 27, 2024 3:24 pm
as of July 27, 2024 3:24 pm
BUY NOW
Amazon.com
Wait For A Price Drop
Price History
Statistics
| Current Price | $249.99 | July 27, 2024 |
| Highest Price | $270.00 | April 11, 2024 |
| Lowest Price | $249.99 | July 27, 2024 |
Since April 11, 2024
Last price changes
| $249.99 | July 27, 2024 |
| $270.00 | April 11, 2024 |
NEWTRY Automatic Rebar Tie Gun Pro 7-34mm Rebar Tier Tying Machine 0.3’’-1.33’’ Steel Bar Tie Tool with 2 Rechargeable Batteries 4000mAh 21V, NEWTRY
Price: $325.90
as of July 27, 2024 3:24 pm
as of July 27, 2024 3:24 pm
BUY NOW
Amazon.com
Wait For A Price Drop
Price History
Statistics
| Current Price | $325.90 | July 27, 2024 |
| Highest Price | $325.90 | April 11, 2024 |
| Lowest Price | $325.90 | April 11, 2024 |
Since April 11, 2024
Last price changes
| $325.90 | April 11, 2024 |
NEWTRY Upgraded Rebar Tie Gun Automatic Rebar Tier Machine Tying Gun 1’’-1.57’’ Steel Bar Tie Tool with 2 Rechargeable Batteries 328ft Wire Coil 0.8S a Knot 14.4V, NEWTRY
Price: $1,159.00
as of July 27, 2024 3:24 pm
as of July 27, 2024 3:24 pm
BUY NOW
Amazon.com
Wait For A Price Drop
Price History
Statistics
| Current Price | $1,159.00 | July 27, 2024 |
| Highest Price | $1,209.00 | April 11, 2024 |
| Lowest Price | $1,159.00 | July 27, 2024 |
Since April 11, 2024
Last price changes
| $1,159.00 | July 27, 2024 |
| $1,209.00 | April 11, 2024 |